Pilot Valves

       Home Up BST Feedback BST Contents Search BST


Home
PV2-1.0R
WFM-14R
PV-1.5R

            Pilot Valves           

BST's Pilot Valves allow a large volume of injection gas to rapidly be injected into the production string in intermittent gas lift operations.  The injection gas first enters the pilot section and compresses the bellows, which lifts the stem off the seat and directs pressure to the power section.  This opens the power section and injects gas through the larger master ported power section.  When the injection pressure draws down, the small ported pilot section closes, and the power section spring then closes the master port.  Pilot valves are used for unloading and for intermittent gas lift operation.

PV2-1.0R - BST's 1" nitrogen charged bellows type pilot valve with a full 32/64" master port in the power section.  Requires BST's K2-1.0 latch.

WFM-14R - BST's version of Teledyne-Merla's spring operated 1" pilot valve with a 28/64" master port.  Requires WFM style latch.

PV-1.5R - BST's 1" nitrogen charged bellows type pilot valve with a 36/64" master port.  Can be used with any 1" latch.

All products listed are currently available from BST Lift Systems.  Please contact us for details.


Send mail to dave@bstlift.com to comment about this web site.
Copyright 2013 BST Lift Systems Inc.
Last modified: August 17, 2017

 IndustryNet
BST Lift Systems, Inc. is Listed on IndustryNet